Filter
Top Products
Safety Precautions/ Usage Precautions
ZOOM MRT-3
3
Handling
• Since the MRT-3 is a precision electronic
device, avoid applying excessive force to
the controls. Do not operate the keys or
controls with your foot.
•Take care that no foreign objects (coins
or pins etc.) or liquids can enter the unit.
• Be sure to turn the power to all
equipment off before making
connections.
• Before moving the unit, turn the power
off, and disconnect all cables and the AC
adapter.
Alterations
Never open the case of the MRT-3 or
attempt to modify the product in any way
since this can result in damage to the unit.
In Case of Trouble
If there seems to be a defect or a problem
with the unit, immediately disconnect the
AC adapter or remove the batteries to shut
off the power. Then disconnect any other
cables connected to the unit.
Usage Precautions
• Electrical interference
For safety considerations, the MRT-3 has
been designed to provide maximum
protection against the emission of
electromagnetic radiation from inside the
device, and protection from external
interference. However, equipment that is
very susceptible to interference or that emits
powerful electromagnetic waves should not
be placed near the MRT-3, as the possibility
of interference cannot be ruled out entirely.
With any type of digital control device, the
MRT-3 included, electromagnetic
interference can cause malfunctioning and
can corrupt or destroy data. Care should be
taken to minimize the risk of damage.
• Cleaning
Use a soft, dry cloth to clean the MRT-3. If
necessary, slightly moisten the cloth. Do not
use abrasive cleanser, wax, or solvents (such
as paint thinner or cleaning alcohol), since
these may dull the finish or damage the
surface.
Please keep this manual at hand for
future reference.
Caution
Caution
Caution