Filter
Top Products
6.
Adjust the tempo if necessary.
The pattern tempo can be changed at any time. For recording a difficult phrase, it might be
helpful to temporarily reduce the tempo.
7.
Tap the pads in accordance with the metronome sound.
The sound of the respective pad is heard, and it is recorded for the duration set with the
quantize value. You can verify the current position in the pattern by checking the display.
When the end of the pattern is reached, the recording loops back to the beginning and
continues, allowing you to add to the recording as often as desired. (If necessary, use the
[PAD BANK] key to change the pad bank.)
8.
To temporarily pause pattern recording, press the [REC] key while real-time
recording is in progress.
The [REC] key starts to flash. If you hit a pad in this condition, the sound will be heard, but
it is not recorded. This is useful to check the phrasing and sound before actually recording.
To resume recording, press the [REC] key once more.
9.
To erase the sound from a specific pad, push the pad while holding down the
[DELETE/ERASE] key.
While the key is held down, the sound from that pad is erased from the pattern.
10.
When recording is completed, press the [STOP] key.
• If a MIDI clock signal is being received, real-time recording is not possible. For details, please
refer to page 44.
•When there is not enough remaining free memory in the MRT-3, the indication "FULL" appears on
the display, and further recording is not possible. Erase unneeded patterns.
NOTE
Snare drum
Bass drum
Snare drum
Bass drum
ZOOM MRT-3
18
Using Patterns (Pattern Mode)