Filter
Top Products
• When the copy is executed, the existing contents of the user pattern selected as copy target will
be erased. Make sure that the pattern you have selected is one that you don't mind erasing.
• When the copy source is a user pattern, the same pattern is first selected after step 2. However, it
is not possible to copy a pattern onto itself.
4.
To execute the copy process, press the [INSERT/COPY] key. To cancel the
process, press the [STOP] key.
When copying is completed, the unit returns to the pattern mode with the copy target pattern
being selected.
If copying was canceled, the unit returns to the pattern mode with the copy source pattern
being selected.
Erasing a Single User Pattern
When you no longer need a certain user pattern, you can erase its contents to return it to the
empty state. This is useful to make room for new patterns and free up memory of the unit.
Once you have erased a user pattern, you will not be able to restore it. Make sure that you really
want to erase the pattern before carrying out the following steps.
1.
In pattern mode, select the user pattern to be erased (U01 – U99).
The pattern number is shown on the display.
2.
Press the [DELETE/ERASE] key.
The [DELETE/ERASE] key flashes and the indication "dEL" alternates on the display with
the pattern number.
@01 DEL
@01
NOTE
NOTE
ZOOM MRT-3
24
Using Patterns (Pattern Mode)