Figure 3-15 Color Settings dialog box
The Color Settings dialog box gives you independent control of the following settings:
■ Text
■ Graphics
■ Photographs
■ General
Text, Graphics, and Photographs sections
Use these sections to adjust the Neutral Grays setting for each control.
Neutral Grays
The Neutral Grays drop-down menu controls the selection of a device-dependent color table that is
embedded in the printer firmware. The options are Black Only or 4-Color. You can adjust the Neutral
Grays setting independently for Text, Graphics, or Photographs.
■ Black Only. This option generates neutral colors (grays and black) by using only black toner. This
option guarantees that neutral colors do not have a color cast. Black Only is the default setting for
the Text and Graphics components.
■ 4-Color. This option generates neutral colors by combining all four colors of toner, which produces
smoother gradients and transitions to non-neutral colors. It also produces the darkest possible black.
4-Color is the default setting for Photographs.
ENWW
HP PCL 6 and PS emulation unidriver features (for Windows 2000 and Windows XP)
87
Windows HP unidriver
features
