A SERVICE OF

logo

Open as PDF
next previous
Figure 6-64 Memory Card Printing Settings screen
NOTE The Memory Card Printing Settings screen is available only on the HP Color
LaserJet 2840.
On the Memory Card Printing Settings screen, you can change the settings associated with printing
photos that are stored on memory cards.
The Enable memory cards check box is selected by default. Clear it to disable the memory-card reader.
The settings on this screen can be password-protected by setting a password on the Password screen
of the Network Settings tab.
The following Photo image size settings are available:
■ Wallet (2.5x3.25 in.)
■ 3x4 in.
■ 3.5.5 in.
■ 4x6 in.
■ 5x7 in.
■ 8x10 in.
■ Full Page
The Photo Number of Copies setting allows you to type in values from 1 to 99. The default setting is
1 copy.
The following values are available for the Photo output color option:
■ Color
■ Monochrome
264 Chapter 6 The HP Toolbox ENWW
The HP Toolbox