To configure the Use Different Paper/Covers options for a print job
For each option, you can set a different tray using the Source Is: drop-down menu. For some options,
the Type is: drop-down menu is also available.
1 To use different paper or cover stock, select the Use Different Paper/Covers check box. A list of
options appears in the dialog box. The full set of selections is visible when you use the down arrow
button to the right of the list to scroll.
2 To use different media for the pages within the print job, select the appropriate option (Front Cover,
First Page, Other Pages, Last Page, or Back Cover) in the dialog box. A check mark appears to
the left of the option when you change a setting using the Source is: or Type is: drop-down menus.
3 Click OK to print.
NOTE You must use the same size of media for the entire print job. All options that you select
from the available Use Different Paper/Covers options use the size selected in the First
Page settings.
When you change the type and source of the paper and covers, the settings you select remain
configured until you close the application software.
Each option for the Use Different Paper/Covers setting is described in the following sections, in the
order they appear in the pane below the Use Different Paper/Covers check box.
Front Cover and Back Cover options
Use these options to include a blank or preprinted front cover or back cover on a document.
The following illustration shows the Front Cover setting and options. These options are the same for
the Back Cover setting.
Figure 3-7 Front Cover setting
ENWW
HP PCL 6 and PS emulation unidriver features (for Windows 2000 and Windows XP)
71
Windows HP unidriver
features
