9 – Specifications : Messages and troubleshooting
TASCAM DM-3200 Owner’s Manual 109
✔
Copy from Ch2 Automation configuration
Confirmation when copying automation configuration.
✔
Copy OK?
Press ENTER to confirm,
or a cursor key to cancel.
Confirmation when performing a parameter copy operation.
✔
Copy to xxxx fader level
Press ENTER to confirm,
or a cursor key to cancel
Confirmation when copying fader levels. xxxx may be ALL, ALL MASTER, Aux 1-
8, groups of 8 busses, or groups of 8 channels.
●
Copy was completed.
Popup message on completion of copy operation.
✔
Create project?
Press ENTER to confirm,
or a cursor key to cancel.
Confirming creation of a project.
●
Creating project.
Do not remove the CF card.
Warning not to remove CF card during project completion.
✖
Current Data Initialized.
Fs has changed.
Mixer will reboot.
Press ENTER to confirm,
or a cursor key to cancel.
Notice to restart the DM-3200 following a change of reinitialization and
sampling frequency
✖
Current Data initialized.
Fs has changed.
Mixer will reboot.
Press ENTER to confirm
or a cursor key to cancel.
Notice to restart the DM-3200 following a change of sampling frequency.
●
Data change was applied.
Date and time have been changed.
●
Data has not been changed.
Date and time have not been changed
✖
Device is not active.
A device selected for transport control is not active.
✖
Digital In1: Error
Not audio signal
Press ENTER to continue.
The DIGITAL IN audio source is not providing digital audio data.
✖
Digital In1: Error
Not audio signal
Source Fs unlocked
Press ENTER to continue.
The DIGITAL IN clock source is not providing digital audio data, and the sync
clock is now unlocked.
✖
Digital In1: Error
Source Fs unlocked
Press ENTER to continue.
The DIGITAL IN clock source has experienced an error, and the sync clock is now
unlocked.
✖
Digital INPUT1 : Fs convert On
Can’t select master clock.
Press ENTER to continue.
It is not possible to use a source as a word clock when sampling frequency
conversion is turned on.
✔
DIGITAL TRIM
Update setup?
Press ENTER to confirm,
or a cursor key to cancel
Confirmation that the digital trim values are to be updated.
✖
Effect
Preset a-bbb is Read-only!
An attempt has been made to store to a protected library entry (effect).
●
Effect Bank a-bbb recalled
To Effectx
A library entry has been recalled (effect).
Action Message Meaning
Table 9.2: Popup messages
