9 – Specifications : Messages and troubleshooting
TASCAM DM-3200 Owner’s Manual 113
✔
Paste Buffer data to Chx?
Press ENTER to confirm,
or a cursor key to cancel.
Confirmation shown before pasting copied configuration data to a channel.
✔
Paste Ch2 Automation configuration.
Confirmation shown before pasting copied automation configuration data to a
channel.
✔
Program Change Table
OK to perform Batch Setup?
Press ENTER to confirm,
or a cursor key to cancel.
Confirmation shown before making a batch change to the Program Change
table.
✔
Project data and
resume data are different.
The project data is loaded
ENTER key : from internal memory.
CURSOR key : from CF card.
Shown on power-up. Data has been changed since the project was saved;
should this changed data be loaded?
✔
Recall Automation data?
Current data will be erased.
Press ENTER to confirm,
or a cursor key to cancel.
Confirmation that loading the selected automation data will overwrite the
existing data
✔
Re-assign fader grouping layer?
Press ENTER to confirm,
or a cursor key to cancel.
Confirmation when re-assigning a grouping layer master
✔
Re-assign fader grouping?
Press ENTER to confirm,
or a cursor key to cancel.
Confirmation when re-assigning a fader group master
✔
Re-assign fader (mute) group?
Press ENTER to confirm,
or a cursor key to cancel.
Confirmation when changing a setting
●
Snapshot
BANK a-bbb Recalled.
Successful recall of snapshot data
✔
SELECT xxxx MODE
Press ENTER to confirm,
or a cursor key to cancel
Confirmation that the surround mode will change (to STEREO, 5.1, 6.1 or LRCS).
✔
Shut down?
Press ENTER to confirm,
or a cursor key to cancel.
Confirmation of shutdown (after pressing SHIFT+CTRL+ALT)
✔
Shutdown was not performed
correctly last time.
The project data is loaded:
ENTER key : from internal memory
Cursor key : from CF card.
On power-up — a shutdown was not performed properly. Should data changed
after the project was last stored be loaded?
✔
Signal info : Digital out1
Format : AES/EBU
Contents : Audio
Emphasis : On
Channel Mode : Stereo
FS : 44.1kHz
Word Length : 24bit
Press ENTER to continue.
Detail information popup for digital audio output
✔
Signal info : Slot1 AES3 Card
INPUT LINE1
Format : AES/EBU
Contents : Audio
Emphasis : None
Channel Mode : Stereo
FS : 44.1kHz
Word Length : 24bit
Press ENTER to continue.
Detail information popup for digital audio I/O (AES card)
Action Message Meaning
Table 9.2: Popup messages
