9 – Specifications : Messages and troubleshooting
TASCAM DM-3200 Owner’s Manual 111
✔
GATE Library BANK a-bbb
Name : TASCAM DATA
Create data: DEC/15/2004
20: 35: 45
Project Name: PROJECT ORCA
Project FS: 44.1kHz
Press ENTER to continue.
Information about a library entry (gate).
●
Group x is not grouped.
A group does not exist to be used as a grouping layer.
✔
Grouping Link (Mute ->Fader)
Press ENTER to confirm,
or a cursor key to cancel.
Confirmation that mute groups should be linked to fader groups.
✔
Grouping Link (Fader ->Mute)
Press ENTER to confirm,
or a cursor key to cancel.
Confirmation that fader groups should be linked to mute groups.
✔
Invert source ?
Press ENTER to confirm,
or a cursor key to cancel.
Confirmation when changing between Input and Return sources.
✔
Invert source CHxx-CHxx?
Press ENTER to confirm,
or a cursor key to cancel.
Confirmation when making a batch change between Input and Return sources.
●
Loading project.
Do not remove the CF card.
Warning not to remove the card while a project is loading.
✔
Master DELAY Time
Update setup?
Press ENTER to confirm,
or a cursor key to cancel
Confirmation that the delay values are to be updated.
✔
MC Transport Maps
0 : MMC open ID=120
1 : MTC Generate
2 : None
3 : None
4 : None
5 : None
6 : None
7 : None
8 : None
9 : None
Press ENTER.
Current MMC transport maps.
✖
MIDI Ch1 is already assigned.
Press ENTER to continue.
Warning that a MIDI channel has already been used for Program Change recall
of library entries.
✔
Mixer will mute while checking.
OK to continue?
Press ENTER to confirm
or a cursor key to cancel.
Confirmation that a named digital input source check may change the clock
rate, and therefore the audio output is muted during the check.
✔
Name/Memo is 17 or more characters.
If name is changed on mixer,
it will be shortened to 16 or
fewer characters.
Press ENTER to confirm,
or a cursor key to cancel.
Reminder that stored names and memos must be 16 characters or less in
length.
✖
No copy parameter is selected.
Press ENTER to continue.
An attempt has been made to copy data, without a parameter’s checkbox being
selected.
●
Now copying...
Do not disconnect CF card.
A copy is being carried out.
Action Message Meaning
Table 9.2: Popup messages
