Filter
Top Products
Editing Mixes
10
65
Setting the Mix Channel Effects Send Level
Button: [EDIT] [60 LEVEL]
Page: 5
Parameter: FX Level (00 to 99, or PROG)
This determines the amount of signal from the selected channel that will
be sent to the effects. When set to PROG, the effect level will defer to
the Program’s Effect Level settings.
Selecting the Mix Channel Effects Send
Button: [EDIT] [60 LEVEL]
Page: 6
Parameter: FX Bus (1 to 4, or PROG)
This determines which effect Bus or “Send” the selected channel will be
routed to. When set to PROG, the effect Send assignment will defer to
the Program’s settings.
The Pitch Function [70 PITCH]
The Pitch Function (button [70]) is where you can transpose the Mix
channel’s Program. Both the pitch and MIDI note number are
transposed in this operation.
Shifting the Mix Channel Pitch by Octaves
Button: [EDIT] [70 PITCH]
Page: 1
Parameter: Tune Octave (-2 to +2 octaves)
This transposes the Program’s pitch and MIDI note number in octaves.
Shifting the Mix Channel Pitch by Semitones
Button: [EDIT] [70 PITCH]
Page: 2
Parameter: Semitone (-12 to +12 semitones)
This transposes the Program’s pitch and MIDI note number in
semitones.
The Effect Function [80 EFFECT]
The Effect function is where you select which Program’s effects will be
used by the Mix.
Setting How Effects Respond to Program Changes
Button: [EDIT] [80 EFFECT]
Page: 1
Parameter: Prg Change (ON or OFF)
This parameter determines how the Mix Effects will respond to MIDI
Program Change commands.