Filter
Top Products
21
Keyboard Installation and Operation
Viewing Satellite Sites
A site is a complete matrix switcher/controller system, providing both local and remote
control of resources in a satellite network. If your workstation supports satellite site
switching capabilities, the SITE soft key accesses satellite sites.
To gain access to a satellite site:
1. Press the OPERATOR tab key.
2. Press the NEXT soft key.
3. Enter the site number on the alphanumeric keypad. The site number will appear
next to ENTER on the keyboard's display.
4. Press the SITE (
SITE 1
) soft key. The new site number will appear on the SITE key
icon as SITE n where n is the site number selected in step 3 above.
It is now possible to call remote site monitors and cameras by the procedures dis-
cussed earlier in this chapter.
Viewing Satellite SitesQuicksite Mode
If an AD1024 system has been set up in Quicksite mode (see page 9), a keyboard from
one satellite site can be used to call video inputs from another site, without having to
select the satellite site first.
1. Select a monitor.
2. Enter the camera identification number on the alphanumeric keypad. The number
entered will appear next to the ENTER caption on the display.
3. Press the CAMERA button. The camera number will disappear from next to the
ENTER caption and appear beneath the CAMERA caption on the display. The
SITE caption is also updated to show the site to which the selected camera is
connected.
Notes
The number of trunk connections between satellite sites limits the amount of
cameras that can be called at any one time. For example, if there are five trunk
connections passing each way between two satellite sites, only five cameras from
one site can be called to monitors on the other site at any one time.
An operator can only call cameras to which they have been assigned permission.
Even when running a macro that calls cameras, the operator will only be able to
view cameras to which they have been assigned permission. See page 35 for
more details on assigning permission to cameras and monitors.
Refer to the AD1024 Satellite Configuration Installation Instructions for details on
how AD1024 matrices can be configured for Quicksite functionality.