Filter
Top Products
36
ADCC1100
Program Mode MacrosOperator
Dis’bl
All
Enable
All
Enable
One
Dis’bl
One
Enter
Cameras
Monitors
PTZ Contro
l
To Partition Cameras:
Cameras can be enabled or disabled individually, or all at once.
1. To disable a single camera, press the CAMERAS soft key to highlight the icon.
2. Enter the number of the camera from the alphanumeric keys, then press the
DIS'BL ONE soft key.
3. To disable all cameras, press the CAMERAS soft key to highlight the icon.
4. Press the DIS'BL ALL soft key.
5. To enable a single camera, press the CAMERAS soft key to highlight the icon.
6. Enter the number of the camera from the alphanumeric keys, then press the
ENABLE ONE soft key.
7. To enable all cameras, press the CAMERAS soft key to highlight the icon.
8. Press the ENABLE ALL soft key.
To Partition Monitors:
Monitors can be enabled or disabled individually, or all at once.
1. To disable a single monitor, press the MONITORS soft key to highlight the icon.
2. Enter the number of the monitor from the alphanumeric keys, then press the
DIS'BL ONE soft key.
3. To disable all monitors, press the MONITORS soft key to highlight the icon.
4. Press the DIS'BL ALL soft key.
Figure 4.6: Partition Menu