Filter
Top Products
iii
Keyboard Installation and Operation
WARNING: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
DO NOT INSTALL THIS PRODUCT IN HAZARDOUS AREAS WHERE HIGHLY COMBUSTIBLE
OR EXPLOSIVE PRODUCTS ARE STORED OR USED.
THE EQUIPMENT SUPPLIED WITH THIS MANUAL IS DESIGNED FOR USE IN A GENERAL PUR-
POSE CCTV INSTALLATION AND HAS NO OTHER FUNCTION. DO NOT EXCEED THE VOLT-
AGE AND TEMPERATURE LIMITS GIVEN IN THE SPECIFICATIONS. ONLY USE YOUR ADCC1100
KEYBOARD IN A CLEAN, DRY, DUST-FREE ENVIRONMENT.
BEFORE CLEANING, ISOLATE THE UNIT. USE ONLY A DRY, LINT-FREE CLOTH. DO NOT USE
CLEANING FLUIDS OR SOLVENTS.
THE LIGHTNING FLASH/ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, ALERTS
THE USER TO THE PRESENCE OF A SHOCK HAZARD WITHIN THE PRODUCTS ENCLOSURE.
CAUTION: This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
Electromagnetic Compatibility (EMC)
Radio Frequency Emissions
Federal Communications Commission Code of federal regulations Part 15.
British Standard BSEN55022:1998 Limits and methods of measurement of radio disturbance characteristics of
information technology equipment.
Electrical Safety
Underwriters Laboratories Inc. UL2044 Standard for Safety - Commercial Closed Circuit Television Equipment.
British Standard BSEN60950:1999 Safety of information technology equipment, including electrical business
equipment.
Immunity
British Standard BSEN50130-4 Alarm Systems Part 4 Electromagnetic compatibility Product family standard:
Immunity requirements for components of fire, intruder and social alarm systems.
EU Conformance Statement
A Declaration of Conformity in accordance with the above EU standards has been made and is on file with the
manufacturer.
The manufacturer declares that the product supplied with this document is complaint with the provisions of the
EMC Directive 89/336 EEC and associated amendments and, the Low Voltage Directive LVD 73/23 EEC.
Regulatory Notices
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.