Filter
Top Products
31
Keyboard Installation and Operation
Stage 2 - Programming a Macro
To program a simple macro (single macro assigned to one macro soft key):
1. Press the PROGRAM MODE tab key. Press the NEXT soft key.
2. Press the PROG MACRO soft key. The keyboard display will change to the page
one of the macro selection pages.
3. Use the PREVIOUS / NEXT tab keys to select the macro page that contains the
macro that is to be programmed.
4. Press the soft key for the macro to be programmed. The keyboard display will
change to the OPERATOR menu.
5. Enter the keystrokes that comprise the macro. Note that the keyboard actions will
not be reproduced by the switching system.
6. After entering the macro keystrokes, press the PROGRAM MODE tab key, then
press the NEXT soft key.
7. The PROG MACRO icon will be shown in reverse video. Press the PROG
MACRO soft key to finish programming the macro.
To program multiple macros (multiple macros assigned to one macro soft key):
1. Press the PROGRAM MODE tab key. Press the NEXT soft key.
2. Press the PROG MACRO soft key. The keyboard display will change to the page
one of the macro selection pages.
3. Use the PREVIOUS / NEXT tab keys to select the macro page that contains the
macro that is to be programmed.
4. Enter a number for the first macro that will be assigned to the macro soft key (1 -
9999).
5. Press the soft key for the macro to be programmed. The keyboard display will
change to the OPERATOR menu.
6. Enter the keystrokes that comprise the macro. Note that the keyboard actions will
not be reproduced by the switching system.
7. After entering the macro keystrokes, press the PROGRAM MODE tab key, then
press the NEXT soft key.
8. The PROG MACRO icon will be shown in reverse video. Press the PROG
MACRO soft key to finish programming the macro.
Additional macros may be programmed for the same macro soft key by following steps
1 through 8 above, and by using a different number for the macro at step 4.