Filter
Top Products
Elation Professional® www.elationlighting.com - DMX Programmer Page 24Elation Professional® www.elationlighting.com - DMX Programmer Page 23
WHEN STARTING ADDRESS IS THE ONE SELECTED
1 2 3 54 7 9 1086
ON
1 2 3 54 7 9 1086
ON
1 2 3 54 7 9 1086
ON
1 2 3 54 7 9 1086
ON
1 2 3 54 7 9 1086
ON
1 2 3 54 7 9 1086
ON
1 2 3 54 7 9 1086
ON
1 2 3 54 7 9 1086
ON
Fixture 1 Address 1
Fixture 2 Address 9
Fixture 3 Address 17
Fixture 4 Address 25
Fixture 5 Address 33
Fixture 6 Address 41
Fixture 7 Address 49
Fixture 8 Address 57
DMX Programmer™ Dipswitch DMX Address Chart
Mirrors don’t respond when I move faders
Make sure that the fixture is selected. Make sure address
is correct. Make sure speed is adjusted, if available, for faster
movement. Not all Fixtures have a speed adjustment.
If total of XLR cable is more than 90 feet make sure it is
terminated properly.
Colors don’t respond when I move faders
Make sure that the fixture is selected. Make sure address is
correct. See Chart pages 21 and 22.
If total of XLR cable is more than 90 feet make sure it is
terminated properly.
Scenes don’t playback after I record them
Make sure to press RECORD BUTTON and SCENE BUTTON
simultaneously. LED’s should blink after pressing each
SCENE BUTTON
.
Make sure you are in the correct Page that has scenes
recorded.
Programs don’t playback after I record them
Make sure to press RECORD BUTTON, after pressing
SCENE BUTTON. LED’s should blink after pressing RECORD
BUTTON.
Make sure you are in the correct Program that has steps
recorded
Is Fade Time to long for Speed Selected?
If total of XLR cable is more than 90 feet make sure it is
terminated properly.
DMX Programmer™ Troubleshooting