Filter
Top Products
1. FIXTURE BUTTONS - Used to Select any or all of 8 fixtures.
2. SPEED/FADE TIME FADER- Used to adjust the FADE TIME. Fade
Time is the amount of time it takes the DMX Programmer to completely
change from one scene to another. Used also to adjust the rate of the
program speed in Auto Mode.
3. BANK SELECT - Used to change between fixtures 1-4 and
fixtures 5-8.
4. FOG MACHINE BUTTON -
This button can be a trigger for controlling
a fog machine. For compatiable fog machines see Fog Machine
Connector (22).
5. PAGE SELECT - Used to select between faders 1-4 and 5-8.
6. GROUP - When this button is pressed, several fixtures can be selected
at a time. See Fixture Buttons (1).
7. LED WINDOW - Displays values and settings depending on the
chosen function.
8. UP AND DOWN BUTTONS - These buttons are used to scroll through
menus, pages, and steps.
9. USB LIGHT CONNECTION - This connector is used to connect a
gooseneck light.
10. PROGRAM - There are four program buttons, these button are used to
store or load programs.
11. BLACKOUT - Disables or enables all channel outputs.
12. PAN/TILT JOYSTICK - This joystick controls the Pan or Tilt movement
of fixtures.
13. DELETE - Used to delete scenes and programs.
14. AUDIO/PREVIEW BUTTON - This button is used to activate audio
mode.
15. TAP SYNC BUTTON - Repeatedly tapping this button establishes the
running speed of a program
.
16. RECORD - Pressing this button for 3 seconds, activates Record mode.
Use this button to record scenes and programs.
17. SPEED+FADE BUTTON - Used to transfer control of the Speed/Fade
Time Slider. When the LED is lit the fader will control the Fade Time of
20. CF CARD SLOT - Insert or unload a CF Card (Compact Flash Card)
which allows you to back up the memory using a 32 MB Compact Flash
Card. (Not Included and Optional)
Notice: Use only a 32 MB Compact Flash Card.
21. 9-Pin RS-232 CONNECTOR - The RS-232 port can be usde to connect
to a personal computer in order to do memory backups and
software updates.
22. FOG MACHINE CONNECTOR - Connects to a fog machine using a
5-pin cable. Compatiable fog machines include the Master Blaster
1000, Stallion, Vaporizer™, Vapor Flow™, Fog Storm 1200™ and
1700™.
23. DMX OUT - Used to send DMX signal to fixtures or Packs.
24. DMX POLARITY SELECT - Changes the polarity setting of the DMX
output.
25. POWER SWITCH - Switches the power on or off.
26. DC INPUT - Accepts a DC 9V, 500 mA minimum, power
supply.
20 262524232221
the fixture. When the LED is off, the fader will control Speed Time.
18. SCENE BUTTONS - Used to store Scenes in program mode or
playback your scenes in playback mode
19. FADERS - Used to adjust the intensity from 0% to 100% or DMX
output level from 0 to 255 of each channel.
DMX Programmer™ Controls and Functions
DMX Programmer™ Rear Controls and Functions
DMX Programmer™ Controls and Functions
Elation Professional® www.elationlighting.com - DMX Programmer Page 4Elation Professional® www.elationlighting.com - DMX Programmer Page 3