Filter
Top Products
110
SETUP mode
Select the desired item with the [JOG] dial and press
the [ENTER/YES] key.
The selected item will be set.
Fader Fix Mode Setting [“Fader Fix”]
Whether the fader manipulation should be reflected on the sound volume or not can be set.
The setup content will be held even if the main power is switched off.
Select “Fader Fix” in the menu selection display and
press the [ENTER/YES] key.
The currently set will flash. “Off” will flash in the initial
setting.
On For all modes, manipulation of the
Track fader/Master fader will
have not affect on the sound volume.
Any accidental shifting of the fader
position by vibration and
misoperation can be prevented.
Off (Initial setting) Manipulation of the Track fader/
Master fader will affect the sound
volume.
Press the [EXIT/NO] key (or [STOP] key) to exit from the
SETUP mode.
• Initial setting: [Off]
• Options: [On] or [Off]
* You can set the value for each Program individually.
* The settings can be saved and loaded as part of the
song data.
* The settings are maintained after you turn off the
power to the VF08.
flashing
Input the desired item with the [JOG] dial and press
the [ENTER/YES] key.
The selected item will be set.
Fader Recall Mode Setting [“Fader Recall”]
In the "Setup of the fader recall mode" menu, whether each track fader/master fader settings should be
recalled or not at scene recall, can be setup.
Select “Fader Recall” in the menu a selection display
and press the [ENTER/YES] key.
The currently set will flash. “Off” will flash in the
initial setting.
Off When scene is recalled, the fader
(Initial setting) position immediately prior to
recalling the scene will be directly
employed without recalling the
setup figures of each track fader and
the master fader.
Track When scene is recalled, setup figures
of each track faders only will be
recalled and not recall the master
fader setup figure.
Master When scene is recalled, the setup
figure of the master fader only is
recalled and the track fader setup
figures will not be recalled.
Trk & Mst When scene is recalled, each track
faders and the master fader set up
figures will both be recalled.
Press the [EXIT/NO] key (or [STOP] key) to exit from the
SETUP mode.
• Initial setting: [Off]
• Options: [Off], [Track], [Master] or [Trk & Mst]
* You can set the value for each Program individually.
* The settings can be saved and loaded as part of the
song data.
* The settings are maintained after you turn off the
power to the VF08.
flashing
<Caution>
The “Fader Fix Mode” can be made to function when set
in other (Track, Master or Trk & Mst) than “Off” of the
next item on the “Fader Recall Mode”.
1
2
3
1
2
3