Filter
Top Products
87
Save/Load of Song data
Blinking
While holding down the [RECORD] key, press the
[ENTER/YES] key.
The unit starts formatting the backup disk.
When formatting is completed, "Completed!" appears
on the screen.
Press the [EXIT/NO] key (or the [STOP] key)
repeatedly until exiting the setup mode.
6
7
A backup SCSI disk is formatted and ready to be
used for data saving/loading by the FDMS-3.
If you continue to format another disk, remove the
current disk and repeat the procedure above.
To remove a disk, press the EJECT key on the SCSI
device.
Blinking
Blinking
Blinking
Blinking
Saving data to a SCSI disk
You can save data via the "Save PGM" menu in the
setup mode.
When saving to a SCSI disk, you can save data for
each specified program like saving to an audio
recorder using the S/PDIF signal.
<Details about "Save PGM" menu>
•Output signal options: S/PDIF and SCSI
•Program options: P01 to P99 (an individual Program)
•Track options:
When using S/PDIF:
Tracks 1-8, Tracks 1-16, Tracks 1-24, Tracks 9-16, Tracks 9-24
or Tracks 17-24.
When using a SCSI disk:
All tracks (1-24) is selected automatically. (You can select tracks
individually when saving by the WAV file format).
<Notes>
When saving a single program data to more than one
removable disk, we suggest to put a number on each
disk in the saving order so that you will easily know
the order when loading the data later.
Press the [SETUP] key to enter the setup mode.
The display shows the screen for selecting the setup
menu.
Use the [JOG] dial to select "Save PGM" and press
the [ENTER/YES] key.
The display shows the screen for selecting the device
to which the data is saved. "SCSI" blinks.
While "SCSI" is blinking, press the [ENTER/YES] key.
The display shows the screen for selecting the backup
mode (FDMS 3 or WAV). If a disk formatted by the
FDMS-3 is set, "FDMS3" blinks.
While "FDMS3" is blinking, press the [ENTER/YES]
key.
The display shows the screen for selecting a program
to be saved.
The program number currently selected blinks, while
the data size of the program is shown.
<Hint>
If you select the backup mode to "WAV" and press the
[ENTER/YES] key while a disk formatted by the FDMS-3
is set, the display shows "Warning Illegal Disk!" and the
disk is ejected.
Use the [JOG] dial to select a program to be saved.
Depending on a program selected, the display shows
as below.
1
2
3
4
5
• When selecting a vacant program (no data is
recorded):
"0MB" is shown.
• When selecting a program that can be saved to a
single backup disk:
The example below shows"68 MB".
This means the data size of the data is 68 MB and the
data can be saved to a single disk.
• When selecting a program that needs more than one
backup disk for saving.
The example below shows "2 Disks 130 MB".
This means the data size of the data is 130 MB and you
need two disks to save the data.