Filter
Top Products
Basic operation
25
Caution
•If the vehicle's automatic transmission shift lever is in the "P" position or
manual transmission lever is in the 1, 3, 5 or "R" position, or if a bottle or
other container is in the cupholder, this could interfere with the opening
and closing of the display. When it is safe to do so, move the shift lever to
the "N" or "Neutral" position or remove the container from the cupholder
before opening or closing the display.
•Be careful of the following items while a disc is being ejected.
<Automatic transmission vehicle>
If the shift lever in the "P" position causes interference with disc ejection,
switch the lever to the "N" position to eject discs. (Steering column
mounted shift levers allow unit operation while lever is in either "P" or "N"
position.)
<Manual transmission vehicle>
If the shift lever in the 1, 3, 5 or "R" position causes interference with disc
ejection, switch the lever to the Neutral position to eject discs.
The display will close.
Press the [OPEN] panel button after ejection.
3
Caution
•Do not close the display by hand. This could damage the display.
•Do not place objects such as cups or cans on the display when it is in
the open position. This could damage the display.
•If a liquid such as a beverage is spilled on the display, immediately clean
the display by wiping with a soft dry cloth. If the liquid is left on the
display it could damage the display.
•Do not close the display when it is in the open position while ejecting a
disc or Memory Stick. This could damage the products.
•In order to protect the display from heat and dust, leave the display in the
closed position at all times other than when inserting/ejecting discs or
Memory Sticks.
ATTENTION
After a disc is ejected and the display closes, the sound of a disc spinning
operation (reading) can be heard, but it will stop after a few seconds. This
is not an equipment malfunction.