Filter
Top Products
Basic operation
67
The mode will change to function mode.
If you press the [FUNC] button once more, function mode will be
exited.
Press the [FUNC] panel button.
1
The guide tones are turned on and off each time the
touch switch is touched.
When the guide tones are turned off, the touch switch display color
changes to the selected color.
Touch the touch switch.
2
Setting guide tones
You can turn guide tones on and off.
At the time of purchase, the unit is set so that a beep sounds as a guide tone
when an operation is carried out.
Guide Tone
Guide Tone
The mode will change to function mode.
If you press the [FUNC] button once more, function mode will be
exited.
Press the [FUNC] panel button.
1
The reverse linking function is turned on and off each time the
touch switch is touched.
When the reverse linking function is turned on, the touch switch
display color changes to the selected color.
Touch the touch switch.
2
Setting the reverse linking function for the back-eye camera
Back-eye cameras other than ECLIPSE products are connected to the
CAPTURE IN terminal, the camera images from the rear of the vehicle can be
automatically displayed on the unit's monitor screen when the vehicle's
transmission is placed into reverse. This function for displaying images in this
way can be turned on and off.
Reverse
Reverse