Filter
Top Products
69
How to operate the tuner
ATTENTION
If the reception for a particular station is weak in the area you are in,
automatic selection may not work.
Automatic selection
Turn the [TUNE TRACK] panel button until a beep is heard.
The station that is closest in frequency to the frequency that is
currently displayed on the screen will be searched for
automatically, and searching will stop when the station is received.
To stop the search before a station is found, turn the [TUNE
TRACK] button again.
Turn right: The frequency becomes higher.
Turn left: The frequency becomes lower.
1
Selection using preset switches
Touch the preset switch that already has a station recorded.
1
Touch the or touch switch and select an FM or AM broadcast.
The "ASM" display will flash and the station being received will be
stored automatically in a preset switch.
Presetting stations automatically
Touch (2 seconds or more) the touch switch.
1
ATTENTION
•ASM is an abbreviation for Auto Station Memory.
•If less than six stations have been set, the preset switches that have no
stations set for them will be unchanged.
•If the power supply from the vehicle's battery is disconnected from the
unit as a result of vehicle maintenance or because the unit has been
removed from the vehicle, the stations recorded in the preset switches
will be cleared. If this happens, you will need to reset the stations.
ASM
FM AM