Filter
Top Products
37
Recorder
3. Starting the song recorder
Press a key on the keyboard.
The LED indicators for the REC and PLAY/STOP buttons will
turn on, and recording will start.
* Recording can also be started by pressing the PLAY/STOP button, allowing
a rest period or empty bar to be inserted at the beginning of the song.
4. Stopping the song recorder
Press the PLAY/STOP button.
The LED indicators for the PLAY/STOP and REC buttons will turn
o, the recorder will stop, and the part/song will be stored in
internal memory.
After a few seconds, the Play Internal screen will be shown in
the LCD display, indicating that the song is ready for playback.
Play Internal
Song 1 Part=1&2*
To play back the recorded song, please refer to the ‘Playing
back a song’ instructions on page 38.
Changing panel settings while recording
* The maximum recording capacity is approximately 90,000 notes, with
button and pedal presses also counted as one note.
* If the maximum recording capacity is reached during recording, the
recorder will stop automatically.
* Recorder songs will remain in memory after the power is turned o.
Panel operations stored during recording
Changes made to the sound type. (SOUND SELECT buttons etc.)
Switching between dual/split modes.
Panel operations NOT stored during recording
Changes made to the reverb settings.
Changes made to the eects settings.
Changes made to the tempo.
Changes made to the volume balance in dual/split mode.
Changes made to transpose, tuning, touch, etc.
* Prepare the desired eect, reverb, tempo settings etc. before recording
a new performance.