49
Settings
3
Tone Control
The Tone Control setting allows the overall sound character of the CA93/CA63 digital piano to be adjusted to
provide the best sound quality within the area that the instrument is located. There are ve dierent preset EQ
settings available, with an additional ‘User’ setting allowing ner control over the dierent frequency bands.
To ne C ont rol t y p e s
Tone Control type Explanation
O Tone control adjustment is not performed.
Loudness Emphasises frequencies to retains the instrument’s sound character when playing at low volume levels.
Bass boost Emphasises low-range frequencies, creating a deeper sound.
Treble boost Emphasises high-range frequencies, creating a brighter sound.
Mid cut Reduces mid-range frequencies, creating a clearer sound.
User Allows the low, mid, and high-range frequency bands to be adjusted separately.
1. Selecting the Tone Control setting
Enter the Basic Settings menu (page 47).
Press the
e
or
f
buttons to select the Tone Control setting.
2. Changing the Tone Control type
Press the
c
or d buttons to cycle through the dierent tone
control types.
Press a SOUND SELECT button to exit the Tone Control setting
and return to normal operation.
CreatingaUserEQ
When selecting the ‘User’ tone control type:
Press and hold the FUNCTION button.
After a few seconds the User EQ edit mode will be selected,
with the low-range frequency band shown in the LCD display.
Press the
e
or
f
buttons to select the frequency band to
adjust, then press the press the
c
or d buttons to increase or
decrease the value.
* Each frequency band can be adjust within the range of -6 to +6.
Press the FUNCTION button to exit User EQ edit mode and
return to the Tone Control settings screen.
1-3 Tone Control
= Off
1-3 Tone Control
= Off
1-3 Tone Control
= Loudness
1-3 Tone Control
= Loudness
1-3 User Low
=0
1-3 User Mid
=3
1-3 User High
=5