Filter
Top Products
89
Appendix
LINEINjacks(1/4”phonejack)
These jacks are used to connect a pair of stereo outputs
from other electronic instruments or audio equipment to
the instrument’s speakers. The audio signal from these jacks
bypasses the MASTER VOLUME control, however the the LINE
IN level can be adjusted using the adjustment knob, or by
adjusting the output level of the connected device. To connect
a device in mono, connect the cable to the L/MONO jack only.
LINEOUTjacks(1/4”phonejack)
These jacks provide stereo output of the instrument’s sound
to external speakers, ampliers, mixers, recording devices, and
similar equipment. The audio signal from the LINE IN jacks is
also routed to these jacks. The MASTER VOLUME slider can be
used to control the output level of the instrument’s own sound
without aecting the level of the LINE IN signal. Mono signals
will be output only if a cable is connected to the L/MONO jack.
USBtoHostport(‘B’type)
This USB port is used to connect the CA93/CA63 digital
piano to a computer using an inexpensive USB cable. When
connected, the instrument can be used as a standard MIDI
device, allowing it to send a receive MIDI data. Connect a ‘B’
type USB connector to the instrument, and an ‘A’ type USB
connector to the computer.
MIDI IN/OUT/THRU jacks
These jacks are used to connect the CA93/CA63 digital piano
to external MIDI devices, and also to a computer with a MIDI
interface as an alternative to the ‘USB to Host’ port.
LINE IN STEREO jack (1/8” mini jack)
This jack is used to connect the stereo output from an external
audio device, such as a CD or MP3 player, to the instrument’s
speakers. The LINE IN adjustment knob cannot be used to
adjust the LINE IN level, therefore please use the volume
controls on device itself.
PHONESjacks(1/4”phonejack)
These jacks are used to connect stereo headphones to the CA93/
CA63 digital piano. Two pairs of headphones can be connected
and used simultaneously. When a pair of headphones is
connected, sound will not be produced by the speakers.
USBtoDeviceport(‘A’type)
This USB port is used to connect a USB memory device to the
CA93/CA63 digital piano. This allows MP3/WAV audio les,
and SMF song les to be played directly. It is also possible
to record performances to MP3/WAV audio les, and save
recorder songs stored in internal memory for posterity.
The ‘USB to Device’ functionality of the CA93/CA63 digital
piano conforms to USB2.0 Hi-Speed standards. Older USB
devices can still be used, however data transfer speed will
be limited to the maximum transfer speed of the device.
The ‘USB to Device’ port is intended for connecting USB
memory devices. USB oppy drive devices can be used
to save recorder songs stored in internal memory, or play
SMF song les, yet are not suitable for MP3/WAV audio le
playback or recording.
It may be necessary to format the USB memory device
before it can be used with the CA93/CA63 digital piano.
If so, please refer to the ‘Format’ function instructions on
page 81. Formatting the device will erase all data.
Avoid removing the USB memory device will data is being
loaded or saved, les are being renamed or deleted, or the
device is being formatted.
Other USB devices, such as computer mice, keyboards, or
battery chargers etc. cannot be used with this instrument.
USB device information