Filter
Top Products
47
Settings
Basic Settings
The Basic settings menu contains settings to adjust the pitch, tuning, and general sound of the instrument.
This menu also allows favourite panel settings to be stored, or reset back to the original factory conguration.
Basic Settings
Page no. Setting name Explanation Default setting
1 Key Transpose Raise or lower the pitch of the keyboard in semi-tone steps. 0 C
2 Song Transpose Raise or lower the pitch of SMF songs in semi-tone steps. 0
3 Tone Control Change the EQ settings of the instrument’s sound. o
4 Speaker Volume Change the maximum volume level of the speaker output. High
5 Phones Volume Change the maximum volume level of the headphones output. Low
6 Wall EQ
(CA93 only) Optimise the soundboard speaker EQ based on instrument placement. o
7 Tuning Increase or decrease the pitch of the instrument in 0.5 Hz steps. 440.0
8 Damper Hold Change the eect of the sustain pedal on organ, string, etc. sounds. o
9 Four Hands Enable the ‘Four Hands Mode’ function. o
10 User Memory Store current panel settings as the default (power on) conguration. -
11 Factory Reset Reset panel settings back to the original factory conguration. -
* Default settings will be shown in the rst LCD display illustration (i.e. Step 1) for each setting explanation below.
Entering the Basic Settings menu
Press the FUNCTION button to enter the Functions menu.
The Basic Settings menu will be selected automatically.
Functions
1.Basic Settings
Press the FUNCTION button again to enter the menu.
Selecting the desired setting
After entering the Basic Settings menu:
Press the
e
or
f
buttons to cycle through the dierent
settings pages.
1-1 KeyTranspose
=0C
Settings page number
Enter and exit the selected Functions menu
Cyclethroughthedierentsettingspages