Filter
Top Products
11
2.Front and rear panel
2.Front and rear panel
5. SHIFT key
This key is used in conjunction with other keys. When held down, it gives an additional
function to another ke y.
SHIFT + Play/Pause key:Pla ybac k from the beginning of the pattern.
SHIFT + Rec key:During pla ybac k, erase trig gers from the pattern.
SHIFT + Step keys:Ex ecute the function sho wn belo w eac h step ke y.
SHIFT + dial: If the Shift ke y is held do wn as y ou rotate the dial, the v alue in the dis
play will change in steps of ten.
SHIFT + SELECT key:In Pattern mode , the tar get step will be ad vanced b y one .
For other SHIFT key combinations, refer to the e xplanation of eac h parameter .
Connector section
12
3
4
56
1. Power switch
This s witch turns the po wer on/off. Eac h time y ou press it, the po wer will alternate on
or off .
2. DC 9V
Connect the inc luded AC adapter here .
3. MIDI connectors
IN MIDI data is received at this connector to contr ol the EA-1mk
II
from an e xter-
nal MIDI device or to receive a data dump.
OUT MIDI data is transmitted fr om this connector to contr ol an e xternal MIDI de-
vice or to transmit a data dump.
THRU MIDI data received at the MIDI IN connector is re-transmitted without c hang e
from this connector . This is used to "daisy-c hain" m ultiple MIDI devices.
4. AUDIO IN jack
This jac k receives the signal that will be used f or AUDIO IN of OSC1. The sound that is
input here will be used as the sound of OSC1.
5. PART1/MIX, PART2 (part output jac ks)
Connect y our audio cab les fr om these jac ks to send the sound of P arts 1 and 2 separatel y
to your mixer or po wered monitor system (po wered speaker s) etc. If you wish to output
the sound of P arts 1 and 2 tog ether , make connections to the PART1/MIX jac k.
6. (headphone jack)
A set of stereo headphones fitted with a stereo jac k plug can be connected here .
The output is monaural.