Filter
Top Products
50
31. MASTER FX
In this page you can adjust the master effect settings.
There is one master effect. You’ll see the same effect whether you’re editing it from timbre 1 or 2. In other words if you edit the master effect
from timbre 1, your changes will be reflected in the master effect settings you see from timbre 2.
Knob [1]
Effect Type
[NoEffect, S.Comp…Talk Mod]
Selects the effect type used by the master
effect. For details on the available types,
refer to “Effect guide” in the included CD-
ROM.
Knob [2]
Dry/Wet [Dry, 99:1…1:99, Wet]
Sets the balance between the effect and dry
sounds.
Knob [3]
Effect parameter [MFx Knob…]
This selects the parameter to edit. The sub-
display will show the name of the selected
parameter (e.g., “Sens“). When you use
“Effect parameter” (knob [3]) to select a pa-
rameter, the display for knob [4] will switch
to the value of that parameter. The avail-
able parameters will depend on the effect
you choose for “Type.” For details on the
available effect types, refer to the Effect
Guide in the included CD-ROM.
MFx Knob: Use knob [4] (“Value”) to se-
lect the effect parameter you’ll control from
knobs [1]–[4] in Play mode. (☞p.80 SHIFT
function “Knob assignment”)
Knob [4]
Value
This specifies the value of the parameter
you selected with “Effect parameter” (knob
[3]). The sub-display will show the value
directly (e.g., 0…127). The available param-
eters will depend on the effect you choose
for “Type.” For details, refer to the Effect
Guide in the included CD-ROM.
If “Effect parameter” (knob [3]) is set to
MFx Knob, you can select the effect param-
eters you'll control from knobs [1]–[4] in
Play mode. (☞p.80 SHIFT function “Knob
assignment”)