Filter
Top Products
12 User Guide Oxygen 88
7: Advanced Keyboard Functions
Oxygen 88 includes extended programming capabilities through secondary functions of the keys. The available
parameters are listed along the top edge of the keyboard, and accessed by pressing the Advanced button. The LED
screen shows the numerical value of the parameter being edited.
Cancel
Pressing the Cancel key will exit advanced mode, discarding all changes. Alternatively, pressing the Advanced button a
second time will yield the same result.
NOTE: The Panic, Drawbar and Memory Dump functions take immediate effect and cannot be cancelled once the
corresponding key has been pressed.
Control Select
The Control Select function (CTRL SEL) is used to select a MIDI control (a Knob, Button, Slider or the Sustain or
Expression Pedal jack) for editing.
NOTE: Every control is labeled with a unique number, such as C1, C2, etc. It is not necessary (or possible) to enter the
letter C when following the editing examples below.
1. Press the Advanced button.
2. Press the Control Select key.
3. Enter the control's ID number using the number keys.
4. Press the Enter key to confirm.
Or:
Move or press the control to be programmed, before or after pressing the Advanced button.
Cancel
Ctrl Sel
Ctrl Asgn
Chan Asgn
Global Chan
Data 1
Data 2
Data 3
Prog
Bank LSB
Bank MSB
Panic
Vel Curve
Draw Bar
Mem Dump
Dev ID
Store
Zone Voice
Zone Prg
Zone LSB
Zone MSB
Zone Range
Zone Chan
Zone Cut
Zone Tran
C0 C1 C2 C3 C4 C5 C6 C7
C2C1
C6 C7
C3 C4
0
1
2
3
4
5
6
7
8
9
Enter