Filter
Top Products
Oxygen 88 User Guide 17
Device ID
The Device ID function (DEV ID) allows the assignment of a unique SysEx Device ID to differentiate between multiple
MIDI devices of the same model, when sending or receiving SysEx data.
The default setting of 127 lets the keyboard respond to all incoming SysEx messages compatible with the same type of
controllers. However, if the Device ID is changed to any other value, the keyboard will only respond to SysEx messages
that contain the same Device ID number. This is useful in situations where multiple Oxygen 88 controller keyboards are
connected to the same DAW software and SysEx information needs to be sent to a specific keyboard controller with a
unique Device ID number.
1. Press Advanced.
2. Press the Device ID key - the LED screen will display the current Device ID (for example "1.2.7.").
3. Enter the new Device ID number using the number keys.
4. Press the Enter key.
NOTE: If the Device ID number of an Oxygen 88 keyboard is changed after a Memory Dump was recorded into a
DAW application, any attempts to restore it will be ignored because the numbers do not match. If you do not
remember the Device ID number used when the Memory Dump was recorded, set your Oxygen 88 to Device ID 127
to ensure all Memory Dumps will be recognized.
For more information on SysEx messages and Device ID numbers, please refer to "Chapter 10: MIDI Messages
Defined" on page 34.
Store
The Store function saves control assignment settings to one of 10 memory locations.
IMPORTANT
: Storing new assignment settings will overwrite the contents of the selected memory location
1. Press the Advanced button.
2. Press the Store key - The LED screen displays the number of the current memory location (for example, P. 0.1.).
3. Enter the number of the memory location you want to store the new settings to by using the number keys or the
-/+ buttons.
4. Press the Enter key to save the changes and overwrite the previous settings of the memory location.
NOTE: The Oxygen 88 factory presets can be restored by holding down the "-" and "+" buttons during power up.
IMPORTANT: This will permanently erase all customized user settings.
Number Keys
This section of the keyboard is used to type in numerical parameter values while in Advanced mode.
Enter Key
The Enter key confirms changes made and exits Advanced mode.
NOTE: The Panic, Drawbar and Memory Dump functions take immediate effect when the corresponding key is
pressed. Advanced mode will exit automatically.