M-Audio 88 Electronic Keyboard User Manual


 
Oxygen Series User Guide 48
Disposal of Waste Equipment by Users in the European Union
This symbol on the product or its packaging indicates that this product must not be disposed of with other waste. Instead, it is your responsibility to dispose of your waste
equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more
information about where you can drop off your waste equipment for recycling, please contact your local city recycling office or the dealer from whom you purchased the product.
Precautions On Use
Please read the following precautions on use before operating the system.
Use the correct power cable for your local power supply.
When disconnecting the power cable, turn off the power and allow at least 30 seconds for any electrostaticity to be discharged.
To avoid electric shocks always plug all cables in to properly grounded power sources. Do not use adaptor plugs.
Use an uninterruptible power supply, surge processor or line conditioner in order to protect your system from sudden changes in electrical power.
Location
When running a PAL video monitor with the system there should be a distance of at least one foot between this and the system monitors, thus avoiding picture distortion and
flickering.
Always place the system on a steady, flat surface and ensure that it is not liable to fall over.
Do not place the system where it is exposed to direct sunlight, direct heat, high temperatures or any area where it is in danger of overheating.
Do not place the system near any equipment which generates magnetism.
Do not cover any cooling vents in the system.
Avoid installing the system in a location where humidity, dust and fumes occur.
Handle With Care
Never use the system during abnormal conditions. Do not operate if no picture appears on the monitor, if smoke is emitted, sound is frequently deformed, or if there are any
conditions of malfunction.
Do not place any liquids on or near the system.
Ensure that nothing rests on the system’s cables, that they do not come in to contact with water or excessive heat. Damage to a cable can cause fire or electric shock. They
should be located where they cannot be stepped on or tripped over.
When not using the system for extended periods make sure that all power cables are disconnected from the power source.
Disconnect all external leads before shipping. Do not subject the system to damage shocks during shipment.
Never remove any covers unless in accordance with the manufacturers’ instructions. Do not place any foreign objects through ventilation holes. If a foreign object falls inside the
system disconnect all power cables and contact customer support.
Warning
This product contains chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
Important Safety Instructions
When using electric or electronic equipment, basic precautions should always be followed, including the following:
Read all instructions before using this equipment.
To avoid the risk of shock, keep this equipment away from rainwater and other moisture. Do not use this equipment if it is wet.
The equipment should only be connected to the correct rating power supply as indicated on the product.
Do not attempt to service the equipment. There are no user-serviceable parts inside. Please refer all servicing to authorized Avid personnel.
Any attempt to service the equipment will expose you to a risk of electric shock, and will void the manufacturer’s warranty.
Cleaning
Keep your system clean and dust free at all times. To clean use a soft cloth lightly moistened with a mild detergent. Never use an abrasive pad or solvent such as benzine or alchol.
Do not allow dust and moisture to accumulate in the surrounding environment.
For 240 V AC
For 220 V AC to
240 V AC