Filter
Top Products
Oxygen 88 User Guide 19
Zone Program
The Zone Program (ZONE PRG) key is used to specify the Program Change number that will be sent for a keyboard
Zone, when a Preset Patch is recalled.
Note: Program Change messages are only sent for a Zone upon recalling a Preset Patch, if the Zone Voice function is
set to "ON" for that Zone.
1. Select a Zone by pressing its Zone button.
2. Press the Advanced button.
3. Press the ZONE PRG key - the LED screen will display the currently assigned Program Number.
4. Enter the new Program number using the number keys.
5. Press the Enter key - The assigned Program Change number will be transmitted immediately.
6. Repeat steps 1 - 5 to assign new Program Numbers for the remaining Zones.
After configuring the Program Numbers and exiting Advanced mode, activate all desired Zones by simultaneously
pressing their respective Zone buttons.
Zone LSB:
The Zone LSB (ZONE LSB) key is used to specify the Bank LSB value that will be sent for a keyboard Zone, when a
Preset Patch is recalled.
Note: Bank LSB messages are only sent for a Zone upon recalling a Preset Patch, if the Zone Voice function is set to
"ON" for that Zone.
1. Select a Zone by pressing its Zone button.
2. Press the Advanced button.
3. Press the ZONE LSB key -the LED screen will display the currently assigned Bank LSB value.
4. Enter the new Bank LSB value using the number keys.
5. Press the Enter key -The assigned Bank LSB value will be transmitted immediately.
6. Repeat steps 1 - 5 to assign new Bank LSB value for the remaining Zones.
After setting the Bank LSB values and exiting Advanced mode, activate all desired Zones by simultaneously pressing
their respective Zone buttons.
Zone MSB:
The Zone MSB (ZONE MSB) key is used to specify the Bank MSB value that will be sent for a keyboard Zone, when a
Preset Patch is recalled.
Note: Bank MSB messages are only sent for a Zone upon recalling a Preset Patch, if the Zone Voice function is set
to "ON" for that Zone.
1. Select a Zone by pressing its Zone button.
2. Press the Advanced button.
3. Press the ZONE MSB key -the LED screen will display the currently assigned Bank MSB value.
4. Enter the new Bank MSB value using the number keys.
5. Press the Enter key -The assigned Bank MSB value will be transmitted immediately.
6. Repeat steps 1 - 5 to assign new Bank MSB value for the remaining Zones.
After setting the Bank MSB values and exiting Advanced mode, activate all desired Zones by simultaneously
pressing their respective Zone buttons.