Filter
Top Products
107
VeniceU
Operator Manual
Appendix F: Modification For
VeniceU16 Rack Mounting
Use only screws that were loosened during modification or such ones that
are contained in the mounting set.
The module is a static-sensitive device. Proper grounding and electrostatic
discharge (ESD) precautions are required before handling the module.
This appendix details the modification required to the VeniceU16 console for rack
mounting.
Electrostatic discharge (ESD) precautions
Observe full electrostatic discharge (ESD) — also known as “anti-static” —
precautions when carrying out procedures in this manual that are
accompanied by the ESD Susceptibility Symbol (shown above). This
caution symbol shows you that ESD damage may be caused to items
unless proper ESD precautions are taken, which include the following practices:
• Keep the work area free from plastic, vinyl or styrofoam.
• Wear an anti-static wrist strap.
• Discharge personal static before handling devices.
• Ground the work surface.
• Avoid touching ESD-sensitive devices.
Rack mounting parts
To facilitate the rack mounting modification, the U16 is supplied with two rack mounting
brackets and eight M4 x 10 mm countersunk screws.
Special tools required
For modification you need:
• Allen key: 5 mm
• Torx screwdriver/wrench/bit: T10 and T20
Recommended torque settings
We recommend the following torques per screw size:
• M3 screws = 0.7Nm
• M4 and M6 screws = 1.6Nm