Filter
Top Products
38 Chapter 5: Mono Input Channel
VeniceU
Operator Manual
Overview of the mono input channel
Each mono channel has an XLR input that can be used for mic or line
level signals up to +32dBu. An additional 1/4” inch TRS Jack socket,
provides an input for line level signals that require protection against
accidental 48-volt connection. The line input gives 10dB of permanent
attenuation to the input signal, which allows the connection of
extremely high line level signals of up to +42dBu with the pad
engaged.
Item Section
1 Gain (see “Gain” on page 40)
2 EQ (see “EQ” on page 41)
3 Monitor and aux contributions (see “Monitors” on page 42
and “Auxes” on page 43)
4 Pan (see “Pan, mute and solo” on page 44)
5 100 mm fader and meter (see “Fader, routing and meter” on
page 45)
1
2
3
4
5