52 Chapter 6: Multifunction Input Channel
VeniceU
Operator Manual
Monitors
The monitor sends of the multifunction input channels have similar functionality to
those of the mono input channels. For more information, see “Monitors” on page 42.
Note: Stereo left and right channel signals are summed into a mono signal to be routed
to the monitor buses by the channel monitor sends.
Monitor section of the multifunction input channels
Auxes
The aux sends of the multifunction input channels have similar functionality to those of
the mono input channels. For more information, see “Auxes” on page 43.
Note: Stereo left and right channel signals are summed into a mono signal to be routed
to the aux buses by the channel aux sends.
Aux sections of the multifunction input channels
4 Bass control knob The bass shelving EQ gain is continuously variable
from -15dB to +15dB, with the shelf frequency set to 75Hz.
5 EQ switch and red LED The EQ switch enables the EQ. With EQ
disabled, adjustment of the EQ controls has no effect. This can be used to
compare the sound with and without EQ. The eq LED illuminates to show
that EQ is enabled.
Item Description