Filter
Top Products
50 Chapter 6: Multifunction Input Channel
VeniceU
Operator Manual
Gain (mic inputs)
This section has the same functionality as the gain section of the mono input channels
except for the following. For full details, see “Gain” on page 40.
• 20dB pad switch On multifunction input channels the pad switch has no effect
upon the left and right line levels. Overloads are indicated on the meter by the red
LED at the top (see “Fader, routing and meter” on page 54).
• 80Hz switch On multifunction channels, this switch has no effect upon the left and
right line inputs.
• mic Ø switch On multifunction channels, this microphone phase switch causes a
180-degree phase change (with respect to the input signal), such that the channel
signal will have opposite polarity to the input signal. This switch has no effect upon
the left and right line inputs.
Mic gain section of the multifunction input channels
USB
The usb in switch in each multifunction input channel lets you select the channel input
source as USB (digital).
USB section of the multifunction input channels