Filter
Top Products
113
Various Other Settings
Various Other Settings
You can also use the following procedure to turn the
V-LINK function on.
1. Hold down the [Reset] button and press
either the Upper [Full] button or the Upper
[Brass] button.
Holding down the [Reset] button and pressing the
Upper [Full] button switches the instrument to
“MODE 1” (p. 112). Holding down the [Reset]
button and pressing the Upper [Brass] button
switches the instrument to “MODE 2” (p. 112).
The display changes as shown below, and the
ATELIER switches to Image Control mode.
fig.09-42.eps
The V-LINK function is turned on, and the V-LINK
icon appears in the basic screen.
fig.09-41.eps
2. To cancel the V-LINK function, once again
hold down the [Reset] button and press
either the Upper [Full] button or the Upper
[Brass] button.
If set to “MODE 1” (p. 112), holding down the
[Reset] button and pressing the Upper [Full] button
switches the V-LINK function off. If set to “MODE
2” (p. 112), holding down the [Reset] button and
pressing the Upper [Brass] button switches the V-
LINK function off.
1,2
AT-75_e.book 113 ページ ２００８年８月２１日 木曜日 午前１０時９分