Filter
Top Products
25
Selecting and Playing Sounds
Selecting and Playing Sounds
fig.02-05
Each time you press a voice button, its indicator will switch between being lit
and being turned off. Voices that have their button indicator lit can be played.
Select voices by pressing the Upper, Lower and Pedal Bass Voice Part buttons.
When the power is turned on, the Upper keyboard will play “Full Organ 3,”
the Lower keyboard will play “Lower Organ2” and the Pedal Bass voice will
sound single notes using the “Organ Bass1” voice.
Example:
Selecting “Orch.Brs Ens” for the Upper Organ Part
1.
Press the Upper [Brass] button (indicator lights).
The name of the selected voice appears in the display for several seconds.
fig.02-06
Now when you play the Upper keyboard, the “Orch.Brs Ens” will sound.
You can select the Lower Voice or Pedal Bass Voice in the same way as the
Upper Voice.
Functions of the Upper/Lower/Pedal Bass Sound Select
Buttons
Selecting the Upper/Lower/Pedal Bass Voices
NOTE
If none of the voice buttons or
Vintage organ buttons are lit,
playing the keyboard will not
produce a sound.
NOTE
If you press the Pedal [To
Lower] button (indicator lights
p. 40), the Pedal Bass voice
can now be played by the
Lower keyboard, not by the
Pedalboard.
Settings can be adjusted to
allow multiple notes to be
played on the Pedalboard (p.
99).
AT-75_e.book 25 ページ ２００８年８月２１日 木曜日 午前１０時９分