Filter
Top Products
66
Using the Registration Buttons
Registrations from USB memory or floppy disk can be copied to User memory.
If a Registration saved in USB memory or on a floppy disk is stored in User
memory, the stored Registration data will not disappear even when you turn
off the power. It is convenient to load frequently-used Registration into User
memory.
Registrations saved in User memory can also be copied to USB memory (p.
67).
Copying Registration from USB Memory to User
Memory
1.
Connect the USB memory to the External Memory
connector.
2.
Press the [Utility] button.
3.
Press the Menu [ ] [ ] buttons a number of times to
select “Media Utility.”
fig.02-09.eps
4.
Press the [Rec] button.
5.
Press the Menu [ ] [ ] buttons a number of times to
select “Copy Registration.”
fig.02-10.eps
6.
Press the [Rec] button.
7.
Press the [Media] button to select the media (the location of
the Registration you want to copy).
If you want to copy a Registration from USB memory, select “Ext Memory.”
If you want to copy a Registration from floppy disk, select “Disk.”
Copying Registrations
If you want to copy Registration
from floppy disk, connect the
floppy disk drive to the External
Memory connector.
AT-75_e.book 66 ページ ２００８年８月２１日 木曜日 午前１０時９分