Filter
Top Products
62
Using the Registration Buttons
7.
Press the [Save] button to execute the save operation.
Saving of the Registration data will begin.
When saving ends, the “- - - - - - - - - - - -” in the screen will change to the
Registration name that you saved.
fig.07-11
If you’ve named the Registration (p. 59), it will be saved with that name.
If the following screen appears
If you select a number at which a Registration has already been saved and
press the [Save] button, the following screen appears.
If you wish to update the contents of the Registration data
1.
Press the [Rec] button.
The Registration will be rewritten.
If you wish to save new data instead of updating the Registration
1.
Press the [Reset] button to cancel the procedure.
Rewriting of the Registration will be canceled.
2.
Press the Value [-] [+] buttons to select a number for which
“- - - - - - - - - - - -” is displayed on the upper right of the
screen.
3.
Press the [Save] button to save the Registration set.
When saving is complete, the saved Registration name will be displayed.
NOTE
Never remove the USB memory
or turn off the power while the
operation is in progress. Doing
so will damage the ATELIER’s
internal memory or USB
memory, making it unusable.
AT-75_e.book 62 ページ ２００８年８月２１日 木曜日 午前１０時９分