Filter
Top Products
152
Chapter 8 Various Settings
Chapter 8
Automatically Starting the
Quick Tour
You can set the instrument so that the Quick Tour starts
automatically with no operation required.
1. Hold down the [Wonderland/Game] button and press
the [Part Balance] button.
The Quick Tour screen appears.
2. Touch <Option>.
fig.d-touchpanel.eps_50
3. Touch <ON> or <OFF>.
When set to “ON,” the Quick Tour starts when you turn
on the power. The demo stops as soon as you carry out
any kind of operation. If no operation is performed for
5–10 minutes after that, the automatic demo starts again.
When set to “OFF,” the Quick Tour does not start unless
you touch the Quick Tour screen icon.
4. Touch <Exit> to return to the Quick Tour screen.
* For more information about Quick Tour, refer to the Quick
Start.
Disabling Functions Other
Than Piano Performance
(Panel Lock)
The “Panel Lock” function locks the KF-7 in a state where
only piano performance can be used, and all buttons will be
disabled. This prevents the settings from being inadvertently
modified even if children press the buttons accidentally.
* In the Panel Lock state, only the grand piano sound can be
played.
1. Turn down the volume all the way.
2. Press the [Power] switch to turn off the power.
3. While holding down the [Wonderland/Game] button,
press the [Power] switch and turn on the power.
Then, continue to hold down the button until the Piano
screen appears.
fig.panel_lock.eps
All buttons except for piano play are disabled.
Adjust the volume. When you play the keyboard, the
grand piano sound will be heard.
To undo the Panel Lock function, turn the volume down
to the minimum, and turn on the power once again.