Filter
Top Products
91
Chapter 4 Recording and Saving the Performance
Chapter 4
Recording a New Song (New Song)
This records keyboard performances without the use of the internal songs or
Automatic Accompaniment.
fig.panel4-1
Settings for recording performances
1. Press One Touch Program [Piano] button.
2. Decide on the tone of the performance.
Use the Tone buttons and the touch screen to select the tone.
When you have finished choosing the settings, touch <Exit> to display the Basic
screen.
Recording settings
3. Press the [ (Rec)] button.
You press the [ (Rec)] button and the following messages will appear, when a
song has already been recorded.
fig.m-rec.eps_60
Touch <New Song>.
This switches the KF-7 to the settings required for recording a new song.
The KF-7 is put in recording standby.
To cancel recording, press the [ (Rec)] button once more.
4. Decide on the tempo and beat.
If necessary, press the [Metronome] button to play the metronome.
When you have finished making the settings, touch <Exit> to display the Basic
screen.
Start recording
5. Press the [ (Play/Stop)] button.
A two-bar count-in plays, then recording starts.
Even without pressing the [ (Play/Stop)] button, recording starts when you
play the keyboard. There is no count-in played when you start by playing rather than
pushing the [ (Play/Stop)] button.
If you select <New Song>
when a song has already been
recorded, the “OK to delete
song?” prompt appears in the
screen. For more detailed
information, refer to “If the
following screen appears” (p.
90).