Filter
Top Products
30
Panel Descriptions
ORIGINAL:
The speaker best matched for the selected amp type (p. 28).
1-12” OPEN:
An open-back cabinet with one 12-inch speaker.
2-12” OPEN:
An open-back cabinet with two 12-inch speakers.
4-10” OPEN:
An open-backed cabinet with four 10-inch speakers.
◆ With 1-12” OPEN, 2-12” OPEN, and 4-10” OPEN,
you can select the following variations.
1 CLASSIC Classic speaker units with relatively low
input power capacity, which produce a
warm sound with a smooth mid- and high-
frequency range.
2 MODERN Modern speaker units with relatively high
input power capacity and a powerful mid-
and high-frequency range.
4-12” CLOSED:
A large, sealed cabinet with four 12-inch speakers.
1 CLASSIC Classic speaker units with relatively low
input power capacity, which produce a
warm sound with a smooth mid- and high-
frequency range.
2 MODERN Modern speaker units with relatively high
input power capacity and a powerful mid-
and high-frequency range.
3
CLASSIC STACK
Two large, sealed cabinets with
“CLASSIC” type speaker units.
4
MODERN STACK
Two large, sealed cabinets with
“MODERN” type speaker units.
Effects Section (EFFECTS)
You can use four effects simultaneously: insert, delay, chorus, and reverb.
fig.102
13
EFX
You can select and use one of the six effects WAH, SLOW
GEAR, COMP (compressor), TREMOLO, PHASER, or
FLANGER.
The type will change each time you press [SELECT].
* The function of the two knobs will change depending on the
selected type.
EFX Button [EFX]
Switch the EFX on/off. When on, the indicator will light.
* You can use the foot pedal to turn effects on/off. (p. 36)
13 14 15 16
If you wish to play the sound as specified by the current
locations of the knobs, you should get into the Manual
mode, by pressing [MANUAL] and lighting its indicator.
(p. 24)