Filter
Top Products
34
Panel Descriptions
Master Section
fig.103
17
Tuner Indicator
This displays the pitch during tuning, and the sensitivity for
GK settings.
18
Display
This displays the patch number or variation number.
19
Tuner Button [TUNER]
Press this to use the tuner.
20
Variation/Edit Button
[VARIATION/EDIT]
Use this to set or change the Variation setting.
To view or change the value, hold down the button for two
seconds or more until the indicator starts blinking.
21
GK Button [GK]
Press this to make settings for the divided pickup.
22
System Button [SYSTEM]
Press this to set the System setting.
23
Write Button [WRITE]
Press this to store settings in a user patch.
24
Preset/User Button [PRESET/USER]
Switch between preset patches and user patches.
25
Bank Button [BANK ▼/▲]
Use these buttons to change the patch bank.
When using [VARIATION/EDIT], these are also used as
parameter buttons ([PARAMETER ▼/▲]).
26
Number Button [NUMBER ▼/▲]
Use these to change the patch number.
When using [VARIATION/EDIT], these are also used as
select/value buttons ([SELECT/VALUE ▼/▲] ).
27
Manual Button [MANUAL]
Press this button when you wish to play using the actual
settings of the knobs, rather than the sound stored in the
patch.
28
Direct Number Button
Press these to select patch numbers directly.
* The Direct Number buttons can be used with any bank.
After pressing [A/B], if the indicator is extinguished, these
buttons can be used to select numbers 1–5.
If the indicator is lighted as the result of pressing [A/B],
these buttons can be used to select numbers 6–10.
25 26
19
24
22 2320
21
18
17
29 30
31
27 28