Filter
Top Products
29
Using the WAVE recorder
1.
Check the input level.
fig.recorder04.eps
If the peak indicator at the right end of
the level meter (indicated by the arrow
in the illustration) is lit, turn the [MAIN
MIX] knob to the left to reduce the
level.
2.
Press the
(Record)
button and start recording.
The time counter starts counting
forward.
3.
Press the
(Stop) button to stop recording.
The recorded file will automatically be given a name of “REC_****.WAV”. The “*” field will be a number that
starts with 0001 and increments each time you record.
The recorded file is saved in the root folder of the SD memory card.
Recording
VS-100_r_e.book 29 ページ ２００９年３月２５日 水曜日 午前９時３４分