Filter
Top Products
59
Error Message List
Improper File
fig.improper-file.eps
The selected file cannot be played by the SONAR V-STUDIO
100.
Action:
• Use SONAR or other software to convert the file to a format
that can be played by the SONAR V-STUDIO 100.
For more information about playable formats, see
“Specifications”
(p. 60).
Recorder Working
fig.rcdr-working.eps
The operation cannot be executed because the WAVE
recorder is recording.
Action:
• Stop recording on the WAVE recorder, and perform the
operation once again.
Files Frequency Mismatch
fig.file-freq-mis.eps
The selected file cannot be played because it does not match
the sampling frequency of the background file.
Action:
• Select a file whose sampling frequency matches. (To check
a file’s sampling frequency, see
“Viewing file
information”
(p. 31)
• Use SONAR or other software to convert the file’s sampling
frequency.
Coaxial Frequency Mismatch
fig.coax-freq-mis.eps
The selected file cannot be played because it does not match
the sampling frequency of the digital signal being input to
INPUT 7-8 (COAXIAL IN).
Action:
• Select a file whose sampling frequency matches. (To check
a file’s sampling frequency, see
“Viewing file
information”
(p. 31)
• Change the digital signal’s sampling frequency to match
the file.
• Turn off the digital input (p. 55).
Coaxial In Error/Unsupported Clock
fig.coax-err.eps
A digital signal of a sampling frequency not supported by the
SONAR V-STUDIO 100 is being input to INPUT 7-8 (COAXIAL
IN).
Action:
• Switch your external digital device to a sampling
frequency that is supported by the SONAR V-STUDIO 100,
or switch the V-STUDIO’s sampling frequency to match
that of the digital input signal.
• If the V-STUDIO is connected via USB, match the sampling
frequency of your digital device to the sampling frequency
of the V-STUDIO and your software.
VS-100_r_e.book 59 ページ ２００９年３月２５日 水曜日 午前９時３４分