Filter
Top Products
57
About V-LINK
What is V-LINK?
V-LINK (
) is functionality that allows you to
perform music and video simultaneously. By connecting
V-LINK compatible devices via MIDI, you can easily enjoy a
variety of video effects that are linked with your performance.
For example, by using the SONAR V-STUDIO 100 in
conjunction with the EDIROL Visual Sampler P-10, you can
enjoy performing synchronized video from the SONAR
V-STUDIO 100.
In order to enjoy V-LINK between the SONAR V-STUDIO
100 and EDIROL P-10, you’ll need MIDI cables (sold
separately) to make connections.
Turning V-LINK on/off
1.
Power-on the SONAR V-STUDIO 100 with it
disconnected from your computer.
You can’t use the V-LINK frequency when connected to
a computer via USB.
2.
Press the [V-LINK] button to make it light.
V-LINK will turn on, and the “V” icon appears in the left side of
the level meter screen.
fig.VLINK.eps
When V-LINK is on, you’ll be able to control the video image
from the control surface section.
3.
Press [V-LINK] button once again to turn V-LINK off.
The V-LINK button will go dark.
Connection example
This explanation uses the example of a connection with the
EDIROL P-10. Use a MIDI cable to connect the SONAR
V-STUDIO 100’s MIDI OUT connector to the EDIROL P-10’s
MIDI IN connector.
fig.V-LINKConnection.eps
To avoid malfunctions or speaker damage, lower the
volume of all device and turn off their power before you
make connections.
V-LINK parameters
*1: Differs depending on whether the power is on or off
ON: F0H 41H 10H 00H 51H 12H 10H 00H 00H 01H 6FH F7H
OFF: F0H 41H 10H 00H 51H 12H 10H 00H 00H 00H 70H F7H
Controller
V-LINK Control Transmitted MIDI Message
TRACK <
Image Switching
(Clip Switching)
C0 00
TRACK > C0 01
ASSIGN C0 02
MUTE C0 03
SOLO C0 04
ARM C0 05
VALUE
Video Control,
Video Bank Select
B0 00 00–47
Fader Video Control B0 0B 00–7F
V-LINK Mode Switching (*1)
SONAR V-STUDIO 100
MIDI OUT
MIDI IN
EDIROL P-10
VS-100_r_e.book 57 ページ ２００９年３月２５日 水曜日 午前９時３４分