Filter
Top Products
Putting the devices into operation
13
Connecting the mains unit
Only use the supplied mains unit. It is designed for the receiver and ensures safe operation.
To connect the mains unit:
̈ Insert the connector of the mains unit Ƽ into the socket º of the receiver.
̈ Pass the cable of the mains unit through the cable grip ¶.
̈ Slide the supplied country adapter ƽ onto the mains unit Ƽ.
̈ Plug the mains unit Ƽ into a wall socket.
SK 100 bodypack transmitter
Inserting the batteries/accupack
For powering the bodypack transmitter, you can either use two 1.5 V AA size batteries or the
rechargeable Sennheiser BA 2015 accupack.
̈ Push the two catches ¸ in the direction of the arrows and open the battery compart-
ment cover µ.
̈ Insert the two batteries or the accupack as shown above.
Observe correct polarity when inserting the batteries/accupack.
̈ Close the battery compartment.
The battery compartment cover µ locks into place with an audible click.
Ƽ
ƽ
º
¶
µ
µ
¸