Filter
Top Products
Using the devices
19
To activate the RF signal:
SKM 100 radio microphone
To switch the radio microphone on (online operation):
To switch the radio microphone off:
̈ If necessary, deactivate the lock mode (see page 21).
Use this function to save battery power or to prepare a bodypack transmitter for use
during live operation without causing interference to existing transmission links.
̈ Briefly press the ON/OFF button Ƹ.
“RF Mute Off” appears on the display panel.
̈ Press the SET button ¶.
The transmission icon ብ is displayed again.
̈ Briefly press the ON/OFF button ¹.
The radio microphone transmits an RF signal. The transmission icon ብ is displayed.
The red ON LED ¾ lights up and the standard display “Frequency/Name” appears
on the display panel.
You can switch the radio microphone on and deactivate the RF signal on switch-on.
For more information, see below.
̈ Press the ON/OFF button ¹ until “OFF” appears on the display panel. The red
ON LED ¾ goes off and the display panel turns off.
When in the operating menu, pressing the ON/OFF button ¹ will cancel your entry
(ESC function) and return you to the current standard display.
MHz
543.200
ew100 G3
MUTE
P
AF
ብ
ON/OFF
SET
¾
¹
ON/OFF
ON/OFF