Filter
Top Products
Putting the devices into operation
14
Charging the accupack
To charge the BA 2015 accupack:
̈ Insert the bodypack transmitter into the L 2015 charger (optional accessory).
Connecting the microphone cable/instrument cable
The audio input is designed for the connection of both condenser microphones and instru-
ments (e.g. guitars). DC powering of the condenser microphones is via the audio input.
̈ Use one of the recommended Sennheiser microphones or the optional CI 1 instrument
cable.
̈ Connect the 3.5 mm jack plug ƺ from the Sennheiser microphone or instrument cable to
the 3.5 mm jack socket MIC/LINE ³.
̈ Lock the 3.5 mm jack plug by screwing down the coupling ring ƻ of the cable.
̈ Via the operating menu, adjust the sensitivity of the microphone/line input.
Attaching and positioning the corresponding microphones
ME 2/ME 4 ̈ Use the microphone clip Ƽ to attach the microphone to clothing (e.g. tie, lapel).
The ME 2 clip-on microphone (shown on the right in the diagram) has an omni-directional
pick-up pattern. It is therefore not necessary to position it precisely.
̈ Attach the ME 2 microphone as close as possible to the sound source.
The ME 4 clip-on microphone (shown on the left in the diagram) has a cardioid pick-up
pattern.
̈ Position the ME 4 microphone so that its sound inlet is directed towards the sound source
(e.g. mouth).
ME 3 ̈ Adjust the ME 3 headmic so that a comfortable and secure fit is ensured.
The ME 3 headmic has a cardioid pick-up pattern.
̈ Position the microphone so that its sound inlet is directed towards the sound source
(e.g. mouth).
Attaching the bodypack transmitter to clothing
You can use the belt clip ƽ to attach the bodypack transmitter to clothing (e.g. belt, waist-
band).
The belt clip is detachable so that you can also attach the transmitter with the antenna
pointing downwards. To do so, withdraw the belt clip ƽ from its fixing points and attach it
the other way round. The belt clip ƽ is secured so that it cannot slide out of its fixing points
accidentally.
The L 2015 charger can only charge the combination BA 2015 accupack/bodypack
transmitter. Standard batteries (primary cells) or individual rechargeable battery
cells cannot be charged.
³
ƻ
ƺ
Ƽ