Filter
Top Products
Product overview
6
Overview of the displays of the EM 100 receiver
After switch-on, the receiver displays the standard display “Receiver Parameters”. For further
illustrations and examples of the different standard displays, please refer to 24. This stan-
dard display displays the operating states of the receiver.
Display Meaning
ቢ RF level “RF”
(Radio Frequency)
ባ Audio level “AF”
(Audio Frequency)
ቤ Frequency bank and
channel
Current frequency bank and channel number
ብ Frequency Current receiving frequency
ቦ Name Freely selectable name of the receiver
ቧ Pilot tone “P” Activated pilot tone evaluation
ቨ Muting function “MUTE” Receiver is muted
Receiver does not output an audio signal
(see also page 28).
ቩ Battery status of the
transmitter
Charge status:
ቪ Lock mode icon Lock mode is activated
543.200
EW100 G3
1. 1
PEAK
MUTE
P
-10
0
40
25
10
-20
-30
AF
RF
MHz
ብቦ
ቧቨቩቪ
ቢባ ቤ
40
30
20
10
RF
D
i
vers
i
ty
di
sp
l
ay:
Antenna input I is active
Antenna input II is active
RF signal level:
Field strength of the transmitted signal
Squelch threshold level
PEAK
-10
0
-20
-30
-40
AF
Mo
d
u
l
at
i
on o
f
t
h
e transm
i
tter
with peak hold function.
When the level display for audio level shows full
deflection, the audio input level is excessively
high. When the transmitter is overmodulated
frequently or for extended periods of time, the
“PEAK” display is shown inverted.
approx. 100%
approx. 70%
approx. 30%
Icon is flashing; charge status is critical